FAQ

Default solution folder, feel free to edit or delete it.

How to check if your USB pole display is installed correctly?
To check if Your USB Pole Display is Installed Correctly: Click on start or window button on the bottom left of windows. Right click on computer and clic...
Fri, 21 Dec, 2018 at 9:08 AM
How to set up the IP address & TCP port number on LS6100?
How to Set Up the IP Address & TCP Port Number on LS6100: To enter the setup screen, press the LS6000 Reset button. As soon as the system information...
Fri, 21 Dec, 2018 at 9:08 AM
The display is not fitting properly on the LE1015 screen.
To adjust the display position, please Press the Auto Adjust button to let the monitor automatically adjust the video settings. If automatic adjustment c...
Fri, 21 Dec, 2018 at 9:09 AM
The touch function on the LE1015 is not accurate.
Run the touch screen calibration program to do a 4-point calibration and/or 9-point / 25-point linearization. When running the calibration, touch the center...
Fri, 21 Dec, 2018 at 9:23 AM
How to perform a function test for printer-driven cash drawers?
Through the Windows print properties driver to open the cash drawer after receipt is printed, then print a test page.  Drawer should open after test pag...
Fri, 11 Jan, 2019 at 5:43 PM
How to perform a function test for LTX9000UP tabletop display series?
The following test sequence will verify that your table display is working properly.  Before you start this procedure, you must install the pole display cor...
Fri, 21 Dec, 2018 at 12:25 PM
How to perform a function test for LDX9000 pole display series?
The following test sequence will verify that your pole display is working properly.  Before you start this procedure, you must install the pole display corr...
Fri, 21 Dec, 2018 at 4:34 PM
How to perform a function test for LTX9000 tabletop display series?
The following test sequence will verify that your table display is working properly.  Before you start this procedure, you must install the table display co...
Fri, 21 Dec, 2018 at 12:25 PM
How to perform a function test for LDX9000UP pole display series?
The following test sequence will verify that your pole display is working properly.  Before you start this procedure, you must install the pole display corr...
Fri, 21 Dec, 2018 at 12:28 PM
Program KB9000 bump bar with its utility application
INSTALLATION The programming utility software does not require special installation. Just copy the folder in the software package into a target folder in th...
Wed, 26 Dec, 2018 at 3:21 PM