Getting Started

Default solution folder, feel free to edit or delete it.

Installation guide for LE1015 touch monitor
HARDWARE INSTALLATION Connect VGA cable from monitor to computer VGA port Connect USB cable to computer USB port Connect power cord to touch monitor ...
Wed, 26 Dec, 2018 at 2:57 PM
Installation guide for LDX1000 pole display
HARDWARE INSTALLATION Mount the pole display to the metal base plate using the mounting hardware provided. The pole display can be used in a freestanding...
Wed, 26 Dec, 2018 at 2:58 PM
Installation guide for LS8000 KDS controller
HARDWARE INSTALLATION Component Placement The following is recommended when you plan the LS8000 system setup: Place the LS8000 so that you can use the mo...
Wed, 26 Dec, 2018 at 3:00 PM
Installation guide for KB9000 touch bump bar
HARDWARE INSTALLATION Connecting KB9000 to KDS controller Connect the RJ-RJ interface cable connector to the KB9000. Connect the other RJ11 connector of...
Wed, 26 Dec, 2018 at 3:10 PM
Installation Guide LS6100 KDS Controller
Hardware Installation:     Component Placement      The following is recommended when you plan the Logic Net setup:   Place the LS6100 so that y...
Tue, 20 Aug, 2019 at 11:05 AM
Installation Guide LC8100
COMPONENT PLACEMENT    The following is recommended when you plan the LC8100 setup: Place the LC8100 so that:  1. The RESET button is accessible...
Tue, 20 Aug, 2019 at 11:05 AM
LE1017 Installation Guide
Hardware Installation     Be careful with your new LCD monitor, the monitor is very sophisticated and delicate. Turn off the monitor and the PC before you ...
Wed, 21 Aug, 2019 at 9:42 AM
LR2000 POS Thermal Printer Installation Guide
Connecting Printer to Computer or POS Terminal              Connect the interface cable (USB/serial) to the printer.                 Connect the other e...
Thu, 22 Aug, 2019 at 9:49 AM
SB1015W Installation Guide
    Hardware Installation         Remove the MSR mount cover from the monitor.                          2. Insert MSR module. Make sure reader has been...
Thu, 22 Aug, 2019 at 10:46 AM